- 本站编辑：杭州创莘金属制品彩16发布日期：2019-05-06 12:10 浏览次数：
Characteristics of photocutting:1, laser power density is large, the temperature of the workpiece absorbs the laser rapidly increases and melts or vaporizes, even if the melting point is high, the hardness and the brittle material(such as ceramics, diamonds, etc.) can also be processed by laser;2, the laser head and the workpiece do not contact, there is no problem of tool wear;3, workpieces are not stressed, not easy to pollute;4, can be a moving workpiece or sealed in the glass shell material processing;5, the divergence angle of the laser beam can be less than 1 milliarc, the diameter of the spot can be as small as micron, the action time can be as short as nanosecond and picosecond, and at the same time, the continuous output power of the high-power laser can reach the order of kilowatt to ten kilowatts. Therefore, the laser is suitable for precision micromachining. It is also suitable for large-scale material processing;6, laser beam is easy to control, easy to combine with precision machinery, precision measurement technology and electronic computers, to achieve a high degree of automation and high processing accuracy;Robots can be used for laser processing in harsh environments or in places that are difficult for others to access.The above information is compiled and edited by Hangzhou Chuangyi Metal Products Co., Ltd.. For more details, please call: 1373 8038652 or visit our official website http://www.10about.com. We look forward to your call.